Install the Test the Mini Jaw Crusher

The crushing chamber of china jaw crusher is deep and without dead zone, thus improving material feeding ability and the final output; High crushing ratio and even product granularity; The gasket material discharging mouth adjusting device is reliable and convenient, and the adjusting ranges are wide, thus increasing the flexibility of the equipment; The lubricating system is safe and reliable, and the changing of the spare part is convenient, so that the maintenance work becomes easy; primary jaw crusher has simple structure, reliable working condition and low operational cost.

The Installation of mini jaw crusher:

1. This machine needs to be installed in a place with shelter, not in the open air.

2. The electrical machine should be installed at the back of the jaw crusher machine which should be fixed with four foundation bolts and the foundation should be left with discharging mouth and its inclination should be higher than 50°.

3. Mini jaw crusher for experiment use can be installed without foundation or material discharging, and it rotary dryer for sale can be placed in a flat ground or platform.

4. This crushing machine should be used together with other crusher machines and arranged for the convenience of production.

The trial run of mini jaw crusher:

1. Joyal Machinery hydraulic cone crushers suggests customers that run the machine after the installation time exceeds the foundation freezing period.

2. Before the trial run, check whether all the bolts are fastened and whether all the connecting parts are reliably connected.

3. Check whether the belt pulley is normally stressed.

4. After two hours of trial run without load, check whether there is abnormality on the machine, for example, whether the pendulum of the belt pulley and flywheel is normal and whether the parts are loose.

5. Check the temperature of the bearing. If the bearing temperature is too high, immediately stop for examination.