What the Main Parameters of Hammer Crusher

As we all known that hammer crusher machine is used for crushing all kinds of medium hard and abrasive weak material. Compressive strength of the material can not exceed 100 mpa, the moisture content is less than 15%. Being broken material for coal, salt, chalk, crawler type mobile crusher plaster, brick and tile, limestone, etc.

In addition, the main parameters of hammer type crusher are in the following: (1) crushing capacity of 40 tons. (2) the crusher rotor speed between 750 and 750 min/r; (3) the maximum material feeding granularity of the crusher: less than 200 mm (4) the crusher of mobile impact crushing plant maximum discharging granularity should not exceed: less than 25 mm; (5) crusher material permissible humidity less than 9%. (6) of the crusher broken degree is: medium and fine. (7) the application of the crusher is: cement plant, coal preparation plant, thermal power plant, etc. (8) crusher crushing object is: limestone, coal, coke, gypsum and other soft materials

Heavy Hammer Crusher Woking Principle:

The main working part of hammer crusher for sale is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size.

There is a screening plate portable crushing plants for sale under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.