Granite crushing scheme

Granite belongs to a class of materials that are more difficult to break, but is usually slightly more easily broken than basalt. This is because the granite although the hardness is high, but there is a certain brittle. Therefore, the design of the crushing process can be relatively flexible design, if the customer's market price advantage, you can use two broken process program. However, from the long-term production point of view, three broken process is still able to effectively reduce the cost of production methods.

If the customer's market demand for finished stone is not high, you can use two-stage jaw crusher program for production. This configuration is a low investment, maintenance and maintenance of simple programs, the cost of production is also more economical in all programs. However, the drawback of this program is that the grain size of the stone is relatively poor, the proportion of needle-like material is higher. Stone in the market competitiveness is not high, because the high-grade buildings need fine grain stone.

In order to improve the grain size (polygonal cube), you can use jaw crusher plus impact crusher process configuration. This configuration than the above two-level jaw broken investment costs higher, produced by the stone grain is also very good. However, because the granite is more difficult to break the material, impact crusher wear parts wear is relatively high, long-term production increased production costs are considerable. Because granite has a brittle property, such a configuration is also an acceptable solution.

Requiring the product to be excellent in grain size and at the same time reducing the cost of production, we need to add a laminating crusher between the jaw and the break, such as a fine jaw crusher or a cone crusher. This configuration can make the main crushing work by the first break and two broken to complete (laminated crushing), and finally by breaking the broken broken integer. This configuration process can be large reduction in the formation of anti-material after screening. If a production line in the proportion of anti-material is too high, will make the last crusher to increase the number of repeated broken work, the corresponding wear and tear will make the loss will be greatly increased. Two-level crushing and third-level counter-crushing process configuration, making the investment cost has increased, but it is brought about by the production costs greatly reduced. Its advantage is self-evident.

The specific process configuration needs to be based on the actual situation of the site specific analysis, welcome to visit the exchange.